Water Heater Accessories

A boiler is a closed vessel in which water or other fluid is heated under pressure. The hot fluid is then circulated out of the boiler for use in various process or heating applications. more...

Home
Building & Hardware
Dining & Bar
Electrical & Solar
Food & Wine
Heating, Cooling & Air
Air Cleaners & Purifiers
Air Conditioners
Air Filters
Dehumidifiers
Furnaces, Heating Systems
Humidifiers
Other Heating, Cooling & Air
Portable Fans
Portable, Space Heaters
Thermostats
Water Heaters
Other Water Heaters
Storage Tank Water Heaters
Tankless Water Heaters
Water Heater Accessories
Home Security
Kitchen
Major Appliances
Outdoor Power Equipment
Plumbing & Fixtures
Tools
Vacuum Cleaners &...
Wholesale Lots
Window Treatments

Overview

Construction of boilers is mainly limited to copper, steel and cast iron. In live steam toys, brass is often used.

Sources of heat for the boiler can be combustion of fuels such as wood, coal, oil, or natural gas. Electric boilers use resistance or immersion type heating elements. Nuclear fission is also used as a heat source for generating steam. Heat recovery steam generators, or HRSGs use the heat rejected from other processes such as gas turbines.

Boilers can also be classified into:-

Fire-tube boilers. Here the heat source is inside the tubes and the water to be heated is outside.; Water-tube boilers. Here the heat source is outside the tubes and the water to be heated is inside.; A primitive, inefficient type where there are no tubes and the fire heats one side of the water container.;

The goal is to make the heat flow as completely as possible from the heat source to the water. For example, steam locomotives have fire-tube boilers, where the fire is inside the tube and the water on the outside. These usually take the form of a set of straight tubes passing through the boiler through which hot combustion gases flow.

In water-tube boilers the water flows through a large number of narrow tubes around the fire. The tubes frequently have a large number of bends and sometimes fins to maximize the surface area. This type of boiler is generally preferred in high pressure applications since the high pressure water/steam is contained within narrow pipes which can contain the pressure with a thinner wall.

In a cast iron sectional boiler, sometimes called a "pork chop boiler" the water is contained inside cast iron sections. These sections are mechanically assembled on site to create the finished boiler.

There are other types of boilers, largely of historical interest. For example, the Cornish boiler developed around 1812 by Richard Trevithick for generating steam for steam engines. This was both stronger and more efficient than the simple boilers which preceded it. It was a cylindrical water tank around 27 feet long and 7 feet in diameter, and had a coal furnace placed in a single cylindrical tube about three feet wide which passed centrally along the long axis of the tank. The fire was tended from one end and the hot gases from it travelled along the tube and out of the other end, to be circulated back along flues running along the outside of the boiler before being expelled via the chimney. This was later improved upon in the Lancashire boiler which had a pair of furnaces in separate tubes side-by-side. This was an important improvement since each furnace could be stoked at different times, allowing one to be cleaned while the other was operating. These designs are really primitive fire tube boilers, and led on to the Scotch boiler which remains a popular fire tube design.

Read more at Wikipedia.org