Pry Bars

A screwdriver is a device specifically designed to insert and tighten, or to loosen and remove, screws. The screwdriver comprises a head or tip which engages with a screw, a mechanism to apply torque by rotating the tip, and some way to position and support the screwdriver. more...

Home
Building & Hardware
Dining & Bar
Electrical & Solar
Food & Wine
Heating, Cooling & Air
Home Security
Kitchen
Major Appliances
Outdoor Power Equipment
Plumbing & Fixtures
Tools
Air Compressors
Air Tools
Flashlights
Generators, Home-Use
Hand Tools
Clamps & Vises
Bar Clamps
Bench, Table Vises
Other Clamps & Vises
Spring & C-Clamps
Files & Chisels
Hammers
Knives & Cutters
Other Knives & Cutters
Pocket Knives & Cutters
Utility Knives & Cutters
Leatherworking Tools
Levels & Plumb Bobs
Laser Levels
Other Levels & Plumb Bobs
Standard Levels
Measuring Tools
Calipers
Measuring Tapes & Rulers
Other Measuring Tools
Squares
Mixed Tool Sets
Other Hand Tools
Planes
Pliers
Other Pliers
Plier Sets
Single Pliers
Pry Bars
Pullers
Punches
Saws
Screwdrivers
Craftsman Sets
Other Screwdriver Sets
Other Screwdrivers
Screwdriver Sets
Single Screwdrivers
Snap-On Sets
Stanley Sets
Winches
Wrenches
Adjustable Wrenches
Allen & Hex Wrenches
Other Wrenches
Pipe Wrenches
Socket Wrenches
Torque Wrenches
Wrench Sets
Meters, Testers & Probes
Other Tools
Power Tools
Safety, Protective Gear
Tie Downs, Straps
Tool Boxes, Belts & Storage
Welding & Soldering Tools
Vacuum Cleaners &...
Wholesale Lots
Window Treatments

A typical hand screwdriver comprises an approximately cylindrical handle of a size and shape to be held by a human hand, and an axial shaft fixed to the handle, the tip of which is shaped to fit a particular type of screw. The handle and shaft allow the screwdriver to be positioned and supported and, when rotated, to apply torque. Screwdrivers are made in a variety of shapes, and the tip can be rotated manually or by an electric or other motor.

A screw has a head with a contour such that an appropriate screwdriver tip can be engaged in it in such a way that the application of sufficient torque to the screwdriver will cause the screw to rotate.

There are many types of screw heads, of which the most common are the slotted, Phillips, PoziDriv, Robertson, SupaDriv (crosspoint), TORX, and Allen (hex).

Screwdrivers come in a large variety of sizes to match those of screws, from tiny jeweler's screwdrivers up. It is important to use a screwdriver that is the right size and type for the screw used, or it is likely that the screw will be damaged in the process of tightening it. This is less important for PoziDriv and SupaDriv, which are designed specifically to be more tolerant of size mismatch. When tightening a screw with force, it is important to press the head hard into the screw, again to avoid damaging the screw.

Some manual screwdrivers have a ratchet action whereby the screwdriver blade is locked to the handle for clockwise rotation, but uncoupled for counterclockwise rotation when set for tightening screws; and vice versa for loosening.

Many screwdriver designs have a handle with detachable head (the part of the screwdriver which engages with the screw), called bits, allowing a set of one handle and several heads to be used for a variety of screw sizes and types. This kind of design has allowed the development of electrically powered screwdrivers, which, as the name suggests, use an electric motor to rotate the bit. Some drills can also be fitted with screwdriver heads.

Manual screw drivers with a spiral ratchet mechanism to turn pressure (linear motion) into rotational motion also exist, and predate electric screwdrivers. The user pushes the handle toward the workpiece, causing a pawl in a spiral groove to rotate the shank and the removable bit. The ratchet can be set to rotate left or right with each push, or can be locked so that the tool can be used like a conventional screwdriver. Once very popular, these spiral ratchet drivers, using proprietary bits, have been largely discontinued by manufacturers such as Stanley, although one can still find them at vintage tool auctions. Companies such as Lara now offer a modernized version that uses standard 1/4-inch hex shank power tool bits. Since a variety of drill bits are available in this format, it allows the tool to do double duty as a push drill.

Read more at Wikipedia.org