Other Measuring Tools
A caliper is a device used to measure the distance between two symmetrically opposing sides. A caliper can be as simple as a compass with inward or outward-facing points. more...
 Home
Building & Hardware
Dining & Bar
Electrical & Solar
Food & Wine
Heating, Cooling & Air
Home Security
Kitchen
Major Appliances
Outdoor Power Equipment
Plumbing & Fixtures
Tools
 Air Compressors
Air Tools
Flashlights
Generators, Home-Use
Hand Tools
 Clamps & Vises
 Bar Clamps
Bench, Table Vises
Other Clamps & Vises
Spring & C-Clamps
Files & Chisels
Hammers
Knives & Cutters
Other Knives & Cutters
Pocket Knives & Cutters
Utility Knives & Cutters
Leatherworking Tools
Levels & Plumb Bobs
Laser Levels
Other Levels & Plumb Bobs
Standard Levels
Measuring Tools
Calipers
Measuring Tapes & Rulers
Other Measuring Tools
Squares
Mixed Tool Sets
Other Hand Tools
Planes
Pliers
Other Pliers
Plier Sets
Single Pliers
Pry Bars
Pullers
Punches
Saws
Screwdrivers
Craftsman Sets
Other Screwdriver Sets
Other Screwdrivers
Screwdriver Sets
Single Screwdrivers
Snap-On Sets
Stanley Sets
Winches
Wrenches
Adjustable Wrenches
Allen & Hex Wrenches
Other Wrenches
Pipe Wrenches
Socket Wrenches
Torque Wrenches
Wrench Sets
Meters, Testers & Probes
Other Tools
Power Tools
Safety, Protective Gear
Tie Downs, Straps
Tool Boxes, Belts & Storage
Welding & Soldering Tools
Vacuum Cleaners &...
Wholesale Lots
Window Treatments
The tips of the caliper are adjusted to fit across the points to be measured, the caliper is then removed and the distance read by measuring between the tips with a measuring tool, such as a ruler.
They are used in the metalworking field of mechanical engineering, and in woodworking and woodturning.
Types
Inside caliper
The inside calipers on the right are used to measure the internal size of an object.
The upper caliper in the image (at the right) requires manual adjustment prior to fitting, fine setting of this caliper type is performed by tapping the caliper legs lightly on a handy surface until they will almost pass over the object. A light push against the resistance of the central pivot screw then spreads the legs to the correct dimension and provides the required, consistent feel that ensures a repeatable measurement.;
The lower caliper in the image has an adjusting screw that permits it to be carefully adjusted without removal of the tool from the workpiece.;
Outside caliper
Outside calipers are used to measure the external size of an object.
The same observations and technique apply to this type of caliper, as for the above Inside caliper. With some understanding of their limitations and usage these instruments can provide a high degree of accuracy and repeatability. They are especially useful when measuring over very large distances, consider if the calipers are used to measure a large diameter pipe. A vernier caliper does not have the depth capacity to straddle this large diameter while at the same time reach the outermost points of the pipes diameter.
Divider caliper
In the metalworking field divider calipers are used in the process of marking out suitable workpieces. The points are sharpened so that they act as scribers, one leg can then be placed in the dimple created by a center or prick punch and the other leg pivoted so that it scribes a line on the workpiece's surface, thus forming an arc or circle.
A divider caliper is also used to measure a distance between two points on a map. The two caliper's ends are brought to the two points whose distance is being measured. The caliper's opening is then either measured on a separate ruler and then converted to the actual distance, or it is measured directly on a scale drawn on the map. On a nautical chart the distance is often measured on the latitude scale appearing on the sides of the map: one minute of arc of latitude is approximately one nautical mile or 1852 metres.
Read more at Wikipedia.org
|
